Kudin hannun jari NGI Technologies Company Limited
NXI-3106 Series Mai Shirye-shiryen DC Module Supply Power

Gida>Kayayyaki- TJNE>Kayan aikin Modular>Samun Bayanai da Aunawa>Power

NXI-3106 Series Mai Shirye-shiryen DC Module Supply Power
NXI-3106 Series Mai Shirye-shiryen DC Module Supply Power

NXI-3106 Series Mai Shirye-shiryen DC Module Supply Power


NXI-3106 series is a programmable DC power supply module with high power density, high accuracy. Single card with single  slot, output power up to 60W. NXI-3106 supports independent single card /integrated control, supports CC, CV and SEQ  modes, CC&CV priority selection function, widely used in integrated test systems, large-scale production line testing and  other test scenarios.

Raba zuwa:
main Features

● Wutar Wuta 0~60W

● Matsayin Wutar Lantarki 6V/15V/30V/60V

●Yankin Yanzu 12A/4A/2A/1A

●Goyi bayan yanayin CC/CV

● Taimakawa aikin SEQ, matakai 1000 don jimlar fayiloli 10, wanda za'a iya sanyawa kansa.

● Taimako da aka haɗa tare da NXI-F1080, NXI-F1030, NXI-F1020 ma'auni & sarrafawa chassis

● Taimakawa aikin zaɓin fifiko na CC & CV

● Taimakawa kariya ta OVP / OCP / OPP / OTP

●4HP nisa don guda ɗaya

●220V AC shigarwar, goyon bayan LAN tashar sadarwa iko

Ayyuka & Fa'idodi

Babban haɗin kai, 4U chassis yana tallafawa har zuwa tashoshi 16
NXI-3106 programmable DC power supply module can be Integrated used with NXI-F1080 series and other measurement & control system chassis, a single chassis supports up to 16 channels. Compare to general desktop power supply, the  ultra-high integration effectively help users to save the space and cost of test.
NXI3106 4U 16 tashoshi babban haɗin kai

SEQ aiki
NXI-3106 series supports SEQ mode, and it can be edited in up to 1000 steps, users can set output voltage, output current,  and single step dwell time.
NXI3106 SEQ aiki

Ayyukan fifiko na CC&CV
NXI-3106 series supports CC&CV priority function, users  can choose the optimal working mode for testing according  to the characteristics of DUT. As shown in Figure 1, when the DUT needs to avoid voltage  overshoot during testing,the voltage priority mode should be  used to obtain a fast and smooth rise voltage.  As shown in Figure 2, when the DUT needs to avoid the  current overshoot, or the DUT is low impedance, the current  priority mode should be used to obtain a fast and smooth  rising current.
NXI3106 CC&CV aikin fifiko

database

  • Takardar bayanai
  • User Manual
  • Protocol Sadarwa
  • Software & Direba
  • Aikace-aikace
Sunan

Zafafan nau'ikan